INDUSTRY APPLICATIONS: ● Mill scale ● Settled sludge ● Coal slurry ● Dirty water ● Clay slurry ● Waste water ● Water & slag ● Coal fines ● Clarifier sludge ● Plant waste ● Wash down water ● Ash slurry ● Coal pile runoff ● Foundry sand ● Drainage water ● Sewage treatment ● Food processing ● Abattoirs ● Chicken sludge ● Waste paper stock ● Black liquor ● Textile mill waste DESIGN FEATURES: ● Shaft - No submerged bottom bearings, 80mm thick EN8. round bar ● Casing - Rugged one-piece casing is designed to facilitate the flow of all types of solids and fibrous materials — (28%chrome iron) ● Impeller - Slightly different to the VHS with a locknut locking it to the shaft. This method is used to prevent the impeller from turning off if the motor is started in the wrong rotation direction. The impeller will allow any sphere and virtually any solid that enters the suction nozzle to pass through the pump. - (28%chrome iron) ● Bearing frame - Solid cast one piece bearing frame 30mm thick wall thickness ensures precise alignment between bearings. ● Stuffing box - Minimizes blow-back of pumpage around shaft sleeve without actual sealing contact. (28%chrome iron) ● Deflector - Implemented to ensure that no water splash comes in contact with the bearing seals. VSP The Haulage King CAPABILITIES: ● Since the impeller is recessed in the pump casing any solids or fibrous material that can enter the suction inlet will be expelled through the pump discharge ● Solids to 76mm (3 inches) and S.G’s to 1.5 can be handled by this design