Industry Applications: ● Fracking slurry ● Pot ash tailings ● Coal slurry ● Cement slurry ● Bauxite slurry ● Sand slurry ● Red mud ● Fly ash ● Bottom ash ● Kaolin clay ● Phosphate ore ● Mud & silt ● Dredge tailings ● Mill scale ● Alumina hydrate ● Iron ore ● Slag ● Chalk slurry ● Lime slurry ● Clarifier sludge ● Coal refuse ● Textile wastes ● Copper ore slurry DESIGN FEATURES: ● IMPELLER - Large flow passages boost the pumps ability to pass solids while a large diameter allows low-speed operation therefore reducing wear. ● CASING - Volute design to pass large solids with minimal turbulence and re-circulation. Extra thick wall sections at wear points for extended life. ● STUFFING BOX - Easily accessible, the stuffing box comes standard in a weep type arrangement as shown. A flush type design (lantern ring on the casing side of all packing rings) ● SUCTION COVER & LINER - Liner protects the suction cover form abrasive wear, reducing replacement costs. Easily removable providing access to the impeller. ● HEAVY DUTY SHAFT - Rugged design for handling loads and vibration. Threaded to the impeller, the shaft end is protected from abrasion. ● EXTERNAL IMPELLER ADJUSTMENT - Maintains original performance by adjustable screws without disassemble of your pump. ● HEAVY DUTY BEARINGS - Bearings are sized for extended life. A split housing simplifies periodic inspection. The deflector protects bearings for dirt and moisture. CAPABILITIES: ● Solids ranging from 60mm to 228mm and S.G’s to 1.8 can be handled ● The CKX can be supplied in many convenient configurations. The pump is available in both horizontal and vertical arrangements which can either be direct or belt driven. The vertical model is offered for both wet sump and dry pit installations. PERFORMANCE: ● Heads up to 60m and efficiencies to the 74% mark.